beautypg.com

Assembly instructions – Sure Heat 2008 Amana AM33 User Manual

Page 19

background image

19

ASSEMBLY INSTRUCTIONS

Step 7: Assemble Side Burner Cover & Igniter Module

1. Remove the brass burner cap attached with tape along with side burner grate and set aside.

2. Remove the two (2) phillips pan head screws from the handle and use these screws to attach

the handle on the side burner door.

3. Use the supplied four (4) phillips sunken head screws to secure the two (2) hinges on the side

burner tray as shown.

4. Unscrew the igniter button cap and the plastic nut from the igniter module. Insert the neck of the

igniter module to the round hole on the shelf front face. Then use the plastic nut to secure the

igniter module in position. Install battery into battery compartment, negative (-) end in first. Screw

igniter push button cap on.

A. Side burner door

B. Side burner door handle

C. Phillips pan head screw

D. Hinges

E. Phillips sunken head screws

F. 6 poles igniter module

G. Plastic nut

H. AA battery

I. Push button cap

C

A

B

I

H

G

F

E

D

E

D