Sure Heat 2008 Amana AM30 - Manual (Page 10)

4. Repeat step 1-2 to install the cart side right in position.
5. Place the cart back onto the grill cart base. Place two wheel channel assembly bolts through the
holes on the bracket and cart base, then tighten the bolts to the thread hole on the wheel channel.
Make sure that the cart back flanges wrap and cover the cart sides. Use six (6) self-tapping
screws to secure the cart back in position.
Note: Install the self-tapping screws from outside of cart so that the point of screw is in the
inside of the cart.
A. Cart side right
B. Cart back
C. Wheel channel assembly bolt
D. Self-tapping screws
B
D
C
Step 2: Assemble Grill Cart (Cont.)
ASSEMBLY INSTRUCTIONS
A
10