Assembly requirements, Assembly hardware supplied, Tools needed parts supplied – Sure Heat 2008 Amana AM27 User Manual
Page 6: Parts needed
Assembly Hardware Supplied
■ 20 - self-tapping screws
■ 2 - sunken head self-tapping screws
■ 8 - M6 x 40 Phillips pan head screws
■ 1 - Side burner knob with bezel
■ 1 - “AA” battery
NOTE: Other hardware required is attached to the grill where needed.
Tools Needed
Parts Supplied
■ Gas pressure regulator/hose assembly set for 11" WCP LP gas (attached to manifold).
Parts Needed
■ 20 lb LP gas fuel cylinder
■ #2 Phillips screwdriver
■ Adjustable wrench
■ ½" wrench or socket
■ ¼" nut driver or socket
■ Tape measure
■ Level
■ Non-corrosive leak detection
solution
ASSEMBLY REQUIREMENTS
6