Sure Heat 2008 Amana AM27 - Manual (Page 27)

Check the burners
The burners are tested and factory-set for most efficient operation. However, variations in gas supply
and other conditions may make minor adjustments to air shutter or low flame setting necessary.
It is recommended that a qualified person make burner adjustments.
Checking the grill burner flames requires removing the grate and flavor grids.
Burner Flame Characteristics
The flames of the grill burners and side burner should be blue and stable with no excessive noise or
lifting (LP gas flames will have a slightly yellow tip). A yellow flame indicates not enough air. If flame
is noisy or lifts away from the burner, there is too much air. Some yellow tips on flames when the
burner is set to HI setting are acceptable as long as no carbon or soot deposits appear.
Check that burners are not blocked by dirt, debris, insect nests, etc. and clean as necessary.
INSTALLATION INSTRUCTIONS
Normal: soft blue flame Out of Adjustment: Hard
blue flames- too much air
Poor Combustion: Wavy,
yellow flames-too little air.
27