beautypg.com

Knowing your microphone, Maintainence, Distance to source mounting the microphone – Superlux ECM888B User Manual

Page 2: Directivity, Accessories, Type of transducer, About frequency response

background image

4-

5-

6-

Extremely light weight diaphragm, very sensitive to sound. Very small versions
available for hiding applications. High performance condenser microphones are

regarded as standard equipment of recording studios for extreme detail capturing.
Operates with power, such as phantom or battery.

Knowing your microphone

Superlux provides variety selection of microphones for professionals and amatures. To
know your microphone is the first step to successful result.

Type of transducer

Condenser

About Frequency Response

Suitable for working at controlled environment, or for acoustic measurements.
Although people persuit flatness, but for none-professionals, it is a challenge to makes
it works as expectation.

Flat

Based on years of practical experience of pro users. There are curves to be build for
various applications, so that it is very simple to use the microphone for the purpose.
Limiting bandwidth, and emphasing are typical skill.

Popular curve response

Incorporating switchable filters to elliminates interference, such as sub-sonic filter to
cut air-conditioner and floor vibrations. And allows full flat when used in controlled
environment.

Variable response

Maintainence

Condenser microphone shall be kept in low humidity environment for best sound
performance. Store the condenser microphones in airconditioned room or dehumidifier
to keep away form moisture. Clean air is another important factor. Keep away from

smoking environment to avoid tar residuals.

Equal sensitivity to all direction, so that the microphone
doesn t need to pointing toward the sound source. Low
handling and wind noise. Welcome by news gathering, and
music recording applications.

Omni

Distance to source

Mounting the microphone

Close miking or distant miking sound very differently. Vocal recording or live
performance practice close miking mostly. Suitable proximity effect is one desired
target, and lower feedback problem is another factor for live sound application.

While distant miking is common practice for recording, especially stereo pair
recording with large group of performers, such as orchestra or choir.
Distant miking generally picks up less bass section with pressure gradient type of
microphone (cardioid, figure-8, shotgun...) due to acoustic nature and lack of
proximity effects.
Rich bass with distant miking can be recorded with pressure type of microphone
(Omni), which performs the same frequency response with close or distant pick-up.

Pressure gradient microphone is very sensitive to vibration. Suitable shock mount for

high performance microphone is necessary for extreme low noise recording. Sturdy
stand can set the microphone excatly at the sweet spot and keep it there. Choose heavy
duty microphone stand for studio condenser microphone which weights much more

than handle microphone.
Superlux provides wide range of microphone stands for various demands. Big Foot
Willie is specially developed for large condenser microphones that able to support 2
large microphones with stereo bracket for single point stereo recording.

Extension foot on all the 'E' versions serve to mount heavy studio microphone in limit
space live sound applications.

Directivity

Select or set the directivity of your microphone for stereo recording, for various music
instrument, vocal, speech, and environmental sound pick-up. Pair of spaced omni for
A/B stereo, pair of near coincident cardioid for ORTF, and pair of coincident XY for

Blumlein stereo.

Accessories

Supplied accessories

Optional accessories

Shock mount -------

----

-------- HM32

6V alkaline battery ------------------------------------------- 4LR44

--------

---------------------

Foam windscreen --------------------------------------------S02
Mic clip ---------------------------------------------------- HM10B
Instrument boom stand -------------------------------------- MS104
Table top microphone stand --------------------------------- HM6
Adjustable boom stand -------------------------------------- MS131

HM32

Shock Mount

4LR44

6V Alkaline Battery

MS131

Adjustable

boom stand

MS104

Instrument

boom stand

HM6

Table stand

S02

Foam windscreen

HM10B

Mic clip