Superlux S125 - Manual

User Guide
1/2" Condenser Microphone
G O A N G - F A N N C O . , L T D .
2007, SUPERLUX I
LB100S12501EN (Rev. 1) nc.
Specifications
Dimensions (Figure 3)
Features
1/2" true condenser
Type
Pressure gradient
Element
Polar pattern
20 to 20,000 Hz (Figure 2)
Frequency response
Sensitivity
(at 1,000 Hz Open Circuit Voltage)
-45dBV/Pa (5.6mV/Pa)
1Pa=94dB SPL ± 3dB
50 Ω
Rated impedance
1,000 Ω
Minimum load impedance
Equivalent noise level
(A-weighted)
18dB (IEC/DIN 651)
Unidirectional (Cardioid),
rotationally symmetrical about
microphone axis, uniform with
frequency. (Figure 1)
Max. SPL (1 k load) Ω
148dB SPL (THD 1% 1kHz) ≦
130dB
Dynamic range (1 k Load) Ω
J U S T P L A Y I T
Description
The S125 true condenser vocal microphone brings studio grade,
precision 1/2" condenser capsule to the live stage for the
demanding professionals. Successful artist, celebrities sing with
true condenser in the recording studios, and sing with dynamic
mics on the live stages. One of the consideration is durability. The
studio condenser cannot withstand the mechanical challenges as
those dynamics which can easily handle.
Now this is no more a consideration for those who want a studio
grade true condenser microphone when Superlux S125 is ready for
all challenges.
Superlux S125's wide and flat frequency response is the same as
studio condenser, because it is a studio grade microphone as well.
It provides very fine detail resolution, that brings out every details
the artist performed. With switchable -10dB pad, the S125 can also
handle high SPL sound sources. Switchable 3rd order low cut filter
cut out those un-wanted stage noises for clean sound even in noisy
environment.
The triple layers wind screen drop down blowing noises to the
minimum when S125 facing up-close settings.
Not only a professional choice for vocal miking, S125 is also a
professional choice for instrument miking from strings, winds, to
percussions.
Gold plated contacts between capsule and electronics provides
stable performance, yet the convenience the disassemble the
capsule without a tool. Die-cast casing and steel strengthen
processed grill wind screen results sturdy structure, and extreme
low handling noise. All these efforts built up this perfect (almost)
microphone for all performing art professionals.
?
?
?
Wide and flat frequency response.
-10dB pad switch.
3 150Hz low cut filter, switchable. rd
The S125 operates between
-10
to +50 (14 to 122 )
with relative humidity between 0
to 95%.
℃ ℃ ℉ ℉
Environmental conditions
Pin 2 output positive voltage
(related to pin 3) when diaphragm
receives positive pressure.
(Diaphragm moving inward)
Polarity
Integral 3 pin male XLR type
Connector
Charcoal gray paint
Finish
Dimensions
Net weight
350g (12.35oz.)
3.5mA
Current consumption
Power supply
76 dB
Signal-to-noise ratio
S 125
Φ48.0mm(1.90in.) X 177.0mm
(6.70in.) (Figure 3)
TYPICAL POLAR PATTERN (Figure 1)
2000 Hz
4000 Hz
8000 Hz
250 Hz
500 Hz
1000 Hz
TYPICAL FREQUENCY RESPONSE (Figure2)
FREQUENCY IN Hz
Frequency Response
RELATIVE
RESPONSE
IN
d
B
dB
10
-10
-20
20 50 100 200 500 1000 2000 5000 10000 20000 Hz
0
O45.0mm
(1.77in.)
44.0mm
(1.73in.)
177.0mm
(6.70in.)
O48.0mm
(1.90in.)
O23.0mm
(0.90in.)
37.0mm
(1.45in.)
12.0mm
(0.45in.)
48V 4V Phantom ±