Sunny Health & Fitness SF-RB1202 - Manual (Page 9)

Assembly & Adjustments
EXERCISE MONITOR FUNCTIONS
The 6 function Exercise Monitor is set to start automatically when you begin
to cycle. However, it is possible to switch on the monitor by pressing the
Mode Button at the bottom of the monitor. To save battery consumption,
the monitor will also switch off after it has been idle for approximately four
minutes.
Please refer to the leaflet supplied with the Exercise Monitor for all
operational functions.
LUBRICATION and MAINTENANCE
The moving parts in your Cycle are all pre-lubricated at assembly and
should not require further attention. We recommend however that the
cycle is used inside and stored in a dry condition. To clean the metal
and plastic components, a general household cleaner can be used, but
please be sure to dry the cycle and any attachments before use.
Page 8
In the interest of safety, do not use polish or use any lubricant on the
saddle, foam handgrips or pedals.