Sunny Health & Fitness SF-RB1202 - Manual (Page 12)

3.
Page 11
1
19
20
22
31
23
Connect the Supporting T ube (20) to the Main Frame (1) with 1 x M8* 4 0 mm
Connect the other side of Supporting Tube (20) to
the Main Frame (1) using the Ball Head Bolt (19).
Allen Bolt (22), 1 x M8 Flat Washer (23), and 1 x M8 Nylon Nut (31).
8
7
29
1
21
24
23
13
14
23
6
30
26
17
5
4. Connect the Backrest Stem Support (6) to the
Saddle Support (29) with 2 x M8*35 mm Carriage
Bolts (26), and 2 x M8 Flat Washers (23), and 2 x M8
Spring Washers (13), and 2 x M8 Dome Nuts (14).
Then connect the Backrest (7) to the Backrest
Stem (5), using the Flat Head Screw (17) and the
Flat Washers (30). Using the 4 x M8 Flat Washers
Saddle to the desired height, allowing for a slight
(23) and 4 x M8 Allen Bolts (24), connect the
Saddle (8) to the Saddle Support (29). Using the
bend in the knee at the bottom of the cycle rotation.
Re-tighten the Adjuster Knob.
Adjuster Knob (21), connect the Saddle Support
(29) and Backrest to the Main Frame (1). Set the