Sunny Health & Fitness SF-RB1202 - Manual (Page 11)

(14). Repeat for the Rear Stabilizer (3) and tighten all Nuts and Bolts securely.
Page 10
1.
Assembly & Adjustments
Unfold the Main Frame (1), Lock into position using 1 x Locking Pin (15). Connect
the Front Stabilizer (2) to the Main Frame (1) with 2 x M8*65 mm Carriage Bolts (11),
Assemble the Pedals *(Left and Right)(10) to the Pedal Crank (28 and 27) *(See note).
Both Pedals must be tightened securely otherwise damage may occur to the Crank.
2.
15
1
1
14
13
12
11
13
12
14
13
12
11
3
2
Both Pedal and Crank are marked with L&R, please ensure that you insert the
corresponding Pedal.
2 x M8 Curved Washers (12), 2 x M8 Spring Washers (13) and 2 x M8 Dome Nuts
Failure to follow these procedures can result in permanent
damage to your equipment.
One Pedal is marked "R". It has a RIGHT HAND THREAD
for the RIGHT HAND SIDE of the cycle and must be fitted
by turning CLOCKWISE. The Left Pedal is marked "L"
and has reversed threading for the LEFT HAND SIDE.
You must screw to tighten.
IMPORTANT
*
COUNTER-CLOCKWISE
10R
10L
28
27