Sunny Health & Fitness SF-B1001S - Manual (Page 5)

4
ASSEMBLY INSTRUCTIONS
Step A:
Install the Front stabilizer (2) and Rear
stabilizer (3) to the Main frame (1) with
the Bolts (14) and Flat washers (13).
Please make sure that the Leveler feet
are on the bottom and the
transportation wheels are facing up and
towards the front of the bike.
Attach the Water bottle holder (19) to
the frame with the Screws (17).
Note: The Leveler feet (11) under the
stabilizers can be adjusted to keep the
equipment stable.
Step B:
Attach the Handlebar (4) to the Handlebar post (26), secured
with Allen bolts (23), Flat washers (13) and Spring washers (24).
Set the lower Handlebar cover (25B) on the square tube of the
Handlebar post (26) in alignment with the four grooves on the
mouth of the lower Handlebar cover (25B). When the lower
Handlebar cover (25B) slides to the top of the square tube of the
Handlebar post (26); rotate the cover 45 degrees to align with
the Handlebar (4). Use Phillips screws (27) to fix the Top cover
(25A) to the lower Handlebar cover (25B), so that the Handlebar
(4) and Handlebar post (26) are in between the Handlebar cover
pieces (25A/B). Turn and loosen the Knob (8), pull the pin, and
then insert the Handlebar assembly into the Main frame section
simultaneously. Make sure the pin settles into the desired hole
and then secure the Knob.