SunBriteTV SB-5517HD - Manual (Page 24)

Page 24
Adjusting On-Screen Displays – Channel Menu (continued)
Show/Hide
Press the qp buttons to highlight the Show/Hide
adjustment. Press the u button to enter the Show/Hide
submenu seen at left. This will allow you to delete specific
channels from the channels that will appear when you use the
CH+/CH- buttons on the remote or on the TV.
To delete a channel from your CH+/CH- channel scan, press
the qp buttons to highlight the channel. Press the 
button
to delete the channel from the scan list. You will see a
 character appear next to the channel in the list.
To restore a channel to your CH+/CH- channel scan, press the
qp
buttons to highlight the channel. Press the  button
to restore the channel from the scan list. You will see the 
character next to the channel disappear.
Channel No.
Press the qp buttons to highlight the Channel No.
adjustment. Press the t u buttons to change the channel
number for which you wish to change the Channel Label or
view the signal strength on the DTV Signal meter.
Channel Label
Press the qp buttons to highlight the Channel Label
adjustment. Press the u button to enter the Channel Label
mode. As seen in the screen at left, a selection window will
appear over the existing channel name.his will allow you to
change the name of the channel as it appears onscreen when
you select it.
Press the qp buttons to change the highlighted letter
or character. Press the u button to move on to the next
character, and repeat the process until the new channel name
is entered. A total of seven characters is available for each
channel label.
DTV Signal
This meter, shown near the bottom of the image at left,
indicates the signal strength of the channel shown in the
Channel No. item of the menu. The longer the horizontal bar
appears, the better the signal strength. If the signal strength
is extremely poor, no meter will appear and the menu will
simply say Bad.