SoundMax SM-CMMD6511G User Manual
Page 29
29
e Screen saver is set On and the unit is switched on without a disc playing for 3 minutes, a on the TFT.
digital setup
DUAL MONO
Choose the mode of the audio output:
Stereo: choose this setting, when 5.1-channel sound playing, two
channels of signals will be output from the left and right soundtrack; when
2-channel sound playing, stereo signal will be output.
L. Mono: the signal will be output from the left speaker.
R. Mono: the signal will be output from the right speaker.
Mix-mono: the signal from one channel will be output from left and right
speakers.
DYNAMIC
If adjusting to FULL, the audio signal peak value will be the minimum. While adjusting to OFF - maximum.
Use UP/DOWN cursor buttons to move the scroll and adjust the dynamic range.
Preference setup
TV TYPE
This unit is suitable for all kinds of TV systems. You can select one of the
PAL, NTSC or AUTO.
Auto: the TV system is auto switched according to the broadcasting
system.
NTSC: this system is used in USA, Taiwan, Japan etc.
PAL: this system is used in China, Europe, Hong Kong etc.
AUDIO, SUBTITLE, DISC MENU
Set the desired languages for all the settings. If a setting is supported by disc content, it will work.
Otherwise the disc default value works. You also can press the ST/AUDIO button on the RC to select the
audio language. Press the LOC/SUB-T button on the RC to select the subtitle language.