StarTech.com PEX8S1052 - Manual (Page 6)

Instruction Manual
3
Driver Installation
Windows® 8 / 7 / Vista / Server 2008 R2
1. Upon starting Windows, if the Found New Hardware dialog appears on the screen,
cancel/close the window and insert the included Driver CD into the computer’s CD/
DVD drive.
2. Open the Device Manager by right-clicking on Computer, and then select Manage.
In the new Computer Management window, select Device Manager from the
left window panel (For Windows 8, open the Control Panel and select Device
Manager).
3. Right-click on one of the newly detected “Enhanced Serial Multi-2/PCI” devices and
select Update Driver Software, which will start the Update Driver Software Wizard.
4. On the How do you want to search for driver software? window, click Browse my
computer for driver software, then Let me pick from a list of device drivers on
my computer.
5. From the next screen labeled Select your device’s type from the list below, select Show
All Devices (should be highlighted by default), and then click Next.
NOTE: This screen does not appear on all systems, move on to the next step if this
does not apply
6. On the Select the Device Driver you want to install for this hardware screen, click the
Have Disk button.
7. Click Browse from the Install from Disk dialog box that pops up.
8. From the Locate File dialog window that opens, navigate to your CD/DVD drive, then
double-click the appropriate 32 or 64-bit OS folder for the system you are using.
The File Name portion at the bottom should show “*.inf” by default and several files
should be visible. Click the Open button.