Compaq Netelligent 5226A - Manual (Page 2)

C
OMPAQ
N
ETELLIGENT
5226A E
THERNET
S
WITCH
K
EY
F
EATURES
B
ENEFITS AT A
G
LANCE
À
VLAN
À
RMON
À
Multiple High-speed Uplink Ports
À
Dual-speed Auto-sensing Uplink Connections
À
ASIC-based Design
À
High-speed Backplane
À
Performance
À
Full Duplex Support on Every Port
À
Dual Redundant Power Supply Capability
À
Compaq Netelligent Management Software
À
SNMP Management
À
VT-100 Serial Port/Telnet Management
À
Spanning Tree
À
Allows users to configure basic, useful VLAN
environments from the perspective of broadcast
control, network segmentation, and network security
issues.
À
Remote monitoring (RMON) gives the management
system the capability to remotely monitor the switch
for diagnostic purposes.
À
Provides high-speed connections (TX and/or FX) to
backbones, servers, or other 100Mb/s devices.
À
10/100Base-TX ports are dual-speed and auto-sensing
providing flexibility in connectivity.
À
Switching instructions implemented in hardware
rather than firmware–providing higher performance,
reliability, and lower cost.
À
1.05Gb/s backplane allows switch to move mass
amounts of data at full wire-speed data rates.
À
Provides dedicated bandwidth for every port at full
wire-speed data rates.
À
Increases network transfer rate up to 20Mb/s on
10Base-T ports and 200Mb/s on 100Base-TX and
100Base-FX ports.
À
Provides users the ability to keep the switch operable
in the event one of the power supplies fails, offering
additional peace of mind.
À
Flexible SNMP network management tool that enables
Netelligent customers to manage their network.
Supports fault, performance, and configuration
management of all manageable Netelligent hubs,
switches, and routers.
À
Enables monitoring/management of the switch via any
SNMP application.
À
Enables management of switch via standard Telnet
application (over the LAN or via the Internet).
À
Optimizes performance and allows set up of redundant
links for maximum up-time.