StarTech.com PCI2S1P - Manual (Page 7)

Instruction Manual 4
DOS and Linux Configuration
For configuration details for DOS please refer to the documents in the DOS folder on the
installation CD. For Linux configuration information, please refer to the “Troubleshooting” section
of this manual on the next page.
Verifying Your Installation (Windows)
Windows 95/ 98/ 98SE/ ME
1. Go to Start > Settings > Control Panel.
2. Double click System.
3. Click the Hardware tab.
4. If the card and related components do not appear with a red x or yellow exclamation point
(!) next to them, Windows has not detected a problem with the installation and the card
should function normally.
Windows 2000/ XP/ Server 2003
1. Go to Start > Settings > Control Panel.
2. Double click System.
3. Click the Hardware tab and choose Device Manager.
4. If the card and related components do not appear with a red x or yellow exclamation point
(!) next to them, Windows has not detected a problem with the installation and the card
should function normally.