StarTech.com S32M2NGFFPEX - Manual (Page 13)

Instruction Manual
10
4. The S32M2NGFFPEX is now ready for installation into a PCI slot.
System Installation
1. Open your computer case (refer to the computer case user manual for details), and
place the S32M2NGFFPEX with installed M.2 NGFF SSD into an available expansion slot.
2. Using a computer case screw (not included) and the appropriate corresponding
screw driver (not included). Drive the screw into the computer case through the
case mounting hole on the mounting bracket (refer to the computer case user
manual for details).
3. Connect a SATA cable from your motherboard to the SATA Data port on the
S32M2NGFFPEX.
4. Connect a SATA Power cable from your power supply to the SATA Power Port on the
S32M2NGFFPEX.
5. Replace the cover on your computer system, and installation is now completed.