Introduction, Packaging contents, System requirements – StarTech.com SAT32M225 User Manual
Page 5: M.2 ngff ssd installation, Packaging contents system requirements
Instruction Manual
2
Introduction
Packaging Contents
• 1 x M.2 NGFF SSD to 2.5in SATA SSD Converter
• 1 x Mounting screw kit
• 1 x Installation manual
System Requirements
• M.2 NGFF Drive
• SATA Host Device
M.2 NGFF SSD Installation
WARNING! SSD Drives and storage adapters require careful handling. If you are
not careful with your SSD Drive, lost data may result. Always handle your drive with
caution. Be sure that you are properly grounded by wearing an anti-static strap when
handling computer components or discharge yourself of any static electricity build-up
by touching a large grounded metal surface (such as the computer case) for several
seconds.
1. Determine if the drive installation bracket requires relocating by assessing your
drive length. The board is labeled with the respective drive types for length but if
your drive type is unknown,place your SSD next to the M.2 (NGFF) SSD connector,
note which drive installation hole matches the height of your SSD. If the bracket is
already installed in the correct position please proceed to step 4.