StarTech.com PM1115UWGB - Manual (Page 7)

Instruction Manual
3
LED Indicators
LED State Indication
Status Blinking for POST (Yellow)
When power is connected, the Status
indicator will flash five times, and then
go solid.
USB On (Green)
LAN Port has a valid network connection
at 100Mbps.
WLAN On (Yellow)
LAN Port has a valid network connection
at 10Mbps.
Reset Button
Reboot the Print Server:
1. Verify the power of print server is turned on.
2. Press the reset button once, and then release it.
Note: This will restart the print server and stop all on-going and pending print jobs.
Print a Self-test Page
1. With the print server powered on and your printer connected and powered, press
the reset button for 8 seconds, and then release it.
2. A test page including the current print server settings will be printed.
Reset to Factory Defaults:
1. Disconnect the power adapter from the print server.
2. Hold down the reset button.
3. Reconnect the power adapter while continuing to hold the reset button for about 5
seconds.
4. Release the reset button.
5. The print server will restart.
WARNING: This will erase all settings on the print server and return it to factory
default.