StarTech.com PM1115UWGB User Manual

Page 14

Instruction Manual

• Channel: optional
• Data Transmit Rates: select Auto or others
• Transmit Mode: select Auto or others
• On the Wireless Security screen, enable or disable WEP/WPA/WPA2 encryption,

configure according to your wireless network and click Next.

• On the TCP/IP Settings screen, specify a fixed or dynamic IP address for the print

server, a fixed IP address is highly recommended. Click Next.

Note: The IP address of print server must be within the same subnet as your network

adapter.
7. In the setup wizard, select an already configured printer from the list, click Next,

Next and then Finish to complete the installation.

OR
Select Add New Printer to launch the Windows Add Printer Wizard, if the print server is

connected to a printer that hasn’t been installed before and does not appear in the list.

8. Click Next and select Local Printer, make sure the “Automatically detect and install

my Plug and Play printer” check box is NOT checked. Then click Next.

This manual is related to the following products:

PM1115UWEU PM1115UW