beautypg.com

Web interface – StarTech.com R150WN1X1T User Manual

Page 7

background image

Instruction Manual

3

3. If you would like to change the default IP address of the R150WN1X1T device,

enter a new IP here, or click Next.

Web Interface

Once connected to the “ComWi_xxxxxx” SSID , you are able to configure security

settings for the WiFi connection and adjust settings / operating modes using

a standard web browser. The Setup Wizard will guide you through the basic

requirements to configure and secure your AP.
NOTE: It is recommended to secure your wireless access point in public locations

to avoid unwanted access and/or configuration changes.
1. Open your desired web browser and enter http://10.10.1.1/ into the address bar.
2. Select the Operation Mode that fits your application (default: Gateway), then

click Next.