StarTech.com USB300WN2X2C Manual - Manual (Page 8)

Instruction Manual
4
Mac OS
1. Open the System Report by clicking the Apple symbol in the top left corner,
selecting About this Mac, then select System Report.
2. Expand the “Hardware” section and click “USB” in the left column. With the adapter
connected, you should see the following device in the list.
Operation
Windows
Connecting to a wireless network is done through either the Windows wireless
configuration utilities, or through the Realtek utility. You must know the name of
the wireless network (SSID), the type of security it is using (if any) and its associated
password to connect to a wireless network. Consult the documentation for your
wireless access point (AP) or contact your network administrator for details.
Depending on your version of Windows, you can display the list of available networks
using one of the following methods:
Windows 8
Move the cursor to the upper right corner to open the
Charms Bar, select Settings and then select Wifi
Windows 7 Click the network adapter tray icon
Windows Vista Click Start, then Connect To
Windows XP
Right-click the wireless adapter tray icon and select View
Available Wireless Networks