StarTech.com R300WN22GAEU - Manual (Page 7)

Instruction Manual
3
Installation
Please visit www.startech.com/R300WN22GA for full operating instructions and
specifications
1. Connect an Ethernet cable from the WAN port on the Access Point (AP) to your ISP
modem (Cable, DSL, etc.).
2. Connect a second Ethernet cable from your computer to one of the LAN ports on
the AP.
3. Connect the power adapter to the DC jack on the AP and wait approximately 30
second for the unit to initialize.
Note: If the message Error: 0001 appears on the LCD screen, the AP did not detect a
connection on the WAN port, please check your cabling.
4. Open your preferred web browser, enter the IP address of the Access Point
(Default: 10.59.1.200 ) into the address box and press Enter.
5. Login to the web GUI with your username / password (Default: admin / admin)
and click Login.