StarTech.com 110VDSLEX2EU - Manual (Page 5)

Instruction Manual
2
Product Overview
The Ethernet Extender Kit consists of x2 Ethernet VDSL2 Transmitter/Receiver units.
Either unit can be used at either end of your configuration (transmitting end or
receiving end), however the DIP switch settings should be modified according to your
specific needs based on direction of traffic.
By default, all DIP Switch settings on each of the two units are set to the
downward (OFF) position.
See the DIP Switch and Mode Settings section for more information.
Front View
Rear View
Side View
DC Power Input
RJ11 VDSL Port RJ11 VDSL Port
Unit 1
DIP Switch
LED Indicators
DIP Switch
Unit 2
DC Power Input
RJ45 Port RJ45 Port