Operation, Led displays, Dip switch settings – StarTech.com 110VDSLEXTEU User Manual
Page 5
Instruction Manual
2
Operation
LED Displays
LAN LED Display
LED
Blinking
ON
OFF
1
Activity
Link up
Link down
2
100 Mbps
10 Mbps
3
Full duplex
Half duplex
VDSL LED Display
LED
Blinking
ON
OFF
1
Activity
Device
Power On
Device Power Off
2
-
CPE Mode
CO Mode
3
Slowly: Idle
Quickly: Training
Linked
Offline
DIP Switch Settings
The 110VDSLEXT / GB / EU has a 4-position DIP switch for configuration of Side,
Channel, Rate Limit, and SNR.
Pin 1 - CO, CPE Switch
OFF: If Pin 1 is in the OFF position, the 110VDSLEXT / GB / EU will operate in Central
Office (CO) mode.
ON: If Pin 1 is in the ON position, the 110VDSLEXT / GB / EU will operate in Customer
Premise Equipment (CPE) mode.
This manual is related to the following products: