StarTech.com ST4300U3C1B - Manual (Page 7)

Instruction Manual
4
3. The cradle will release, continue to gently unfold the cradle from below the hub,
until it is in its upright position
4. Plug a USB cable into your Smart Phone or Tablet device.
5. Place your device into the cradle. Choose an orientation so that your device is
secure in the cradle. It is recommended to use a horizontal orientation for Tablets
or larger devices, and a vertical orientation for Smart Phones, cell phones, and
smaller devices.
6. Escort the opposite end of your USB cable through the hole located on the cradle
stand and into the USB 2.0 Data/Fast Charge port on the hub.
7. Press the Fast Charge Mode Button on the surface of the hub to switch the USB 2.0
port from standard to charging mode. Once charging mode is enabled, the status
LED will light blue.