StarTech.com USB31GEHD - Manual (Page 10)

Instruction Manual
7
3. Connect the USB type “A” connector on the second USB adapter to an available USB
3.0 port on the host computer. The driver installation will begin automatically.
Repeat these steps for each additional USB adapter you wish to install. Once all USB
adapters are installed, reboot the comp
Configuring the USB 3.0 Mini Dock Adapter
Windows®
When display devices are attached, an icon appears in the taskbar. This gives you
access to the DisplayLink® manager menu.
Note: Windows 8/7 users: The adapter drivers also allow for adjustments through the
Windows built-in Display Settings window. These settings can be accessed by right-
clicking on the Windows Desktop and selecting “Screen Resolution.”
1. From the taskbar, if needed, click the Show hidden icons arrow to show all available
icons.
2. Click the DisplayLink icon. You will see a “USB 3.0 to HDMI and LAN Combo” option,
selecting this display will extend a sub menu with the configurable options for
the connected device. Each display is configured independently. All configuration
options are shown and described below.