StarTech.com SATDUPUEGB - Manual (Page 4)

Instruction Manual
1
Introduction
The SATDUPUE Portable SATA Duplicator with eSATA and USB allows for standalone
duplication/cloning of a SATA hard drive, or connected to a computer system for use as
an external hard drive dock.
As a duplicator, you can create an exact 1-to-1 sector clone from one hard drive to
another, including partition, boot sector information and all data, at a rate of 72 MBps.
While as an external hard drive dock, it support plug-and-play installation and can
be connected to a host computer through USB 2.0 or eSATA, providing data transfer
speeds up to 480 Mbps or 3 Gbps respectively.
Packaging Contents
• 1 x Portable Duplicator
• 1 x USB 2.0 Cable - 1m
• 1 x Power Adapter
• 1 x Instruction Manual
System Requirements
• 2.5in and/or 3.5in SATA hard drive or solid state drive(s)
• Available AC electrical outlet
• Drive Dock Operation:
• Available USB 2.0 or eSATA* port
*Port Multiplier support recommended
• Microsoft ® Windows ® 2000/XP/Server 2003/Vista/Server 2008 R2/7 (32/64-bit), or
Apple ® Mac OS ® X, or Linux ®