beautypg.com

StarTech.com UNIDUPDOCK User Manual

Page 7

background image

Instruction Manual

4

7. Follow the same procedure for either a SATA or IDE hard drive for the Destination side of

the duplicator dock.

NOTE: SATA and IDE hard drives can be mixed, so one side can be SATA while the other

is IDE.

8. Slide the power ON/OFF switch on the side of the unit to the ON position, to power up

the unit.

9. Once the unit has booted up, use the configuration buttons and built-in LCD display to

configure and operate the duplicator dock.

10. If using as an external hard drive dock, connect the USB cable from the duplicator dock to

the computer’s USB port.