StarTech.com SATDUP11IMG Quick Start - Manual (Page 8)

Instruction Manual
5
2. Using the UP/DOWN Navigation buttons and the Display Screen, locate 1.HDD ->
Image, on the [Copy] sub menu, and press the OK button.
3. The SATDUP11IMG will analyze the source drive and ensure the target drive is
ready, by verifying size and format.
a) If the target drive has not been formatted as an Image drive, the SATDUP11IMG will
alert you on the display screen, Press the OK button.
WARNING! Formatting your HDD/SSD will delete all data stored on the target drive.
b) Press the OK button again to format your target drive as an Image drive.
4. Once the drives have been analyzed (and if necessary, formatted the SATDUP11IMG
will begin to copy your SSD/HDD image to the Image Drive.
5. The image will be completely copied when the % indicator on the Display Screen
reaches 100%. The image drive now contains the drive image (and if working with a
non-formatted drive, an image drive has also been created.)