StarTech.com HSB430SATBK - Manual (Page 7)

Instruction Manual
4
Loading hard drives in the Multi-Drive Enclosure
Please note: If you are using third-party RAID software, please ensure that each drive is
configured properly, prior to insertion.
1. Gently pull the spring lock to open the front door of the drive bay:
2. Position the hard drive so that the drive connectors are facing towards the exposed
drive bay, and the hard drive label is facing upward. Gently insert the hard drive into
the bay, until the front door of the bay begins to close.
3. Press the front door closed, until the spring lock is secured. Please note: The front
door will not close securely, if the hard drive is not properly positioned. If you have
difficulty closing the door, please do not attempt to force it closed, as this can cause
damage to the hard drive connectors, as well as the connectors located inside the
Multi-Drive Enclosure. lease remove the drive from the enclosure and verify that the
drive is properly positioned:
4. Repeat steps 1-3 for each hard drive being installed.