StarTech.com HSB225SATBK - Manual (Page 4)

Instruction Manual
1
Introduction
The HSB225SATBK 3.5in SATA Mobile Rack lets you install two 2.5in SATA (SATA, SATA II,
SATA III-6Gbps) hard drives (HDD) or solid state drives (SSD) into an available/unused
3.5in floppy drive bay.
The mobile rack delivers quick and easy access to hard drive contents, using a
convenient “no mounting required /easy eject” feature (much like a tape cartridge or
floppy disk) that eliminates the need for the drives to be installed in a tray - a time-
saving solution for instant drive removals and insertions as part of a system building
process or integration into rackmount systems or industrial environments.
For added security, the mobile rack is equipped with locking bay doors to prevent
unauthorized removal of the swappable hard drives. Also a perfect addition for
operating system image deployment and any task that requires being able to access
large volumes of data on the fly, the hot swap bay provides everything you need to
expedite important projects while maintaining a reliable storage solution.
Packaging Contents
• 1x Dual 2.5in Mobile Rack
• 2x SATA data cables
• 2x Keys
• 1x Screw Kit
• 1x Instruction Manual
System Requirements
• Available 3.5 inch front bay on computer case
• SATA compatible motherboard or controller with two available ports
• SATA compatible power supply with available SATA power connector