StarTech.com DRW110SATBK - Manual (Page 4)

Instruction Manual
1
Introduction
This high quality Removable SATA Hard Drive Drawer/Mobile Rack delivers a
convenient SATA hot-swap solution, allowing you to quickly swap Serial ATA hard
drives in and out of a computer without having to open the computer case.
Simply install the (included) drive bay into a 5.25in drive bay on the host computer,
then mount a 3.5in SATA HDD into the (removable) caddy. Connecting the SATA hard
drive to the computer is as easy as inserting the caddy into the drive bay, which can be
locked to prevent unauthorized removal of the installed SATA drive.
A suitable solution for large volume drives, the HDD drawer supports SATA, SATA II, and
SATA III-6Gbps hard drives allowing you to swap in large amounts of data in a matter of
seconds. With support for SATA HDD speeds up to 6.0 Gbps, the mobile rack/backplane
is fully compatible with RAID installations to ensure maximum performance and
versatility for enhanced storage applications.
The drive caddy features a rear panel ball bearing fan that helps keep the enclosed
drive cool, in turn helping to optimize operation while preserving drive lifespan.
To prevent damage to the hard drive(s) while being transferred in and out of the
computer, the drive caddy features shock absorbers and rubber cushioning that help
limit vibration/shock to the drive. This mobile rack is also compatible with DRW113-
series SATA hard drive caddies.
Packaging Contents
• 1 x Hard Drive Caddy
• 1 x Drive Bay
• 2 x Keys
• 1 x Screw Kit
• 1 x Instruction Manual
System Requirements
• Computer with an available 5.25 inch Drive Bay
• 1 x 7-pin SATA data cable
• Computer Power supply with available LP4 Molex power connector