Compaq 164SX - Manual (Page 24)

2–4 System Configuration and Connectors
AlphaPC 164SX Configuration Switches
2.1 AlphaPC 164SX Configuration Switches
The AlphaPC 164SX motherboard has a switchpack located at SW1, as shown previ-
ously in Figure 2–1. The switches set the hardware configuration and boot options.
Figure 2–2 shows the switch functions.
Figure 2–2 AlphaPC 164SX Configuration Switches
2.2 CPU Speed Selection (CF[6:4])
The clock synthesizer at U45 makes it possible to change the frequency of the
microprocessor’s clock output. The switch configuration is set in SW1, CF[6:4].
These three switches set the speed at power-up as listed in Figure 2–2. The
microprocessor frequency divided by the ratio determines the system clock
frequency.
CF Bit: 400 MHz 533 MHz
4 1 1
5 1 0
6 1 1
CF0
CF1
CF2
CF3
CF4
CF5
CF6
CF7
0 1
Password Bypass: 0 bypasses password protection
1 requires AlphaBIOS password
Fail-Safe Booter: 0: Fail Safe
1: AlphaBIOS or SRM console
Note:
All other combinations
are reserved.
Note: Switch defaults are in bold.
Mini-Debugger: 0 enables Mini-Debugger
1 disables Mini-Debugger
CF Bit: .5MB 1MB 2MB Reserved
0 0 1 0 1
1 0 0 1 1