StarTech.com S354UFER - Manual (Page 8)

Instruction Manual
5
4. Remove the cardboard inserts (if first time setup) and then insert the hard drives
into the slots. If installing less than 4 drives, ensure a drive is installed in the bottom
slot. This will help when reinstalling the metal cage. Hard drives can be removed
from the enclosure by pressing down on the handles, then pulling them out.
5. Once all of the hard drives are installed, reinstall the metal cage and front door.
Make sure the bottom of the cage stays inside of the track before closing the cover.
6. Connect the power adapter DIN connector into the side of the enclosure and power
up the enclosure.
Driver Installation
Windows 2000/XP/Server 2003/Vista/7, Mac OS X, Linux
No driver installation is required for these operating systems, as this enclosure is
natively supported, so the drivers are already installed.