StarTech.com S354UFER - Manual (Page 11)

Instruction Manual
8
Drive Status Indicators
LED Status Description
ON
An error has been detected on one or more
hard drive.
OFF
ON
RAID array is currently rebuilding.
OFF
eSATA/USB/FireWire Connectivity
The LED indicators will show which host interface is currently active on the enclosure.
To switch interfaces, shut the enclosure off and disconnect old cable and then connect
the new cable and turn the enclosure back on. Only one interface can be active at a
time, so it is recommended that only one cable be connected at a time to ensure the
proper interface is chosen.
LED Status Description
ON
eSATA connection active
OFF
ON
USB connection active
OFF
ON
FireWire interface active
OFF