StarTech.com SAT3510U2FGB - Manual (Page 7)

Instruction Manual
4
Using the Enclosure
Windows 2000/XP/Vista/7
If you are using a brand new hard drive that does not contain any data, then you
will first need to prepare the hard drive for use. From the main desktop, right-click
on “My Computer” (“Computer” in Vista), then select Manage. In the new Computer
Management window, select Disk Management from the left window panel.
Locate the Disk that says it is “Unallocated” (check hard drive capacity to confirm it’s
the correct hard drive) and then right-click in the section that says “Unallocated” and
select “New Partition”.