StarTech.com UNI3510UEBGB - Manual (Page 9)

Instruction Manual
6
1. Click Browse to designate the directory in which the software will be installed. Once
you have made your selection, click Install to continue.
2. The installation will now take place. Once the installation is complete, you may exit
the DRIVERS.exe application.
Recognizing the Hard Drive
Windows XP
USB 2.0
If you are using the USB 2.0 interface to connect the hard drive enclosure to your
computer, no setup is required. Simply plug the hard drive enclosure into an available
USB port and turn the power on to the hard drive enclosure. Open My Computer and
the drive should be visible under the heading “Devices with Removable Storage.”