StarTech.com S358BU33ERM - Manual (Page 12)

Instruction Manual
9
5. While holding the drive tray arm open, slide the drive tray back into the slot it was
removed from. Once the drive tray has beein inserted, press the drive tray arm back
into the latched position. Note: You will notices that as the driver tray arm is closed
back into its original position that the tray may shift inwards a little. This is how the
tray inserts the drive.
6. Using the included power Cable, connect the Power Cable Port on the
S355BU33ERM/S358BU33ERM to an available power outlet.
Note: The S355BU33ERM will require the correct voltage be selected. Using a screw
driver or pen make sure to select 115V or 230V depending on your needs.
Note: Please repeat steps 2 through 5 for each additional drive.
1
2