StarTech.com S354SMTB2R - Manual (Page 9)

Instruction Manual
6
Step 2. Connect the Thunderbolt Enclosure
to your computer system.
1. Connect the included Thunderbolt cable from one of the Thunderbolt ports on the
back of the enclosure, to an available Thunderbolt port on your computer system.
Notes:
• Either Thunderbolt port may be used to connect the enclosure to the host
computer system. The remaining Thunderbolt port may be used to daisy chain
to an additional device such as another enclosure, or Display.
• If daising chaining Thunderbolt 1 devices, please ensure the Thunderbolt Hard
Drive Enclosure is the first down stream device, as Thunderbolt 2 performance
will be throttled by a Thunderbolt 1 device.
2. Connect your power adapter from the power adapter port on the back of the
enclosure into an available power outlet.
3. Turn on the enclosure, by placing the power switch in the “ON” postion .