StarTech.com S354SMTB2R - Manual (Page 21)

Instruction Manual
18
Delete Your Array
WARNING!
Deleting your RAID array permanently erases any data on your virtual disk.
However, you can choose to keep partition information on the virtual disk.
1. Hover-over the Operation tab at the top of the Property page and select Delete.
2. A warning will be displayed alerting you that all data on the virtual disk will be
erased. Select OK to acknowledge the warning.
3. An additional pop-up message warning you that drive data will be lost is displayed.
Click Ok continue.
4. A message will now be displayed asking: Do you want to delete the partition
information if this has one? Click OK to delete the partition information or Cancel to
keep the partition information stored on the drive
Customize Your HyperDuo Array
Add Folders for HyperDuo Optimization
1. Launch the MSU software using the icon on your desktop, and login.
2. Select HyderDuo Service from the Marvell Storage menu, then select Advanced. The
customize Wizard will be displayed.