StarTech.com SLIDESHELFD - Manual

Instruction Manual
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Manual Revision: 09/27/2012
For the most up-to-date information, please visit: www.startech.com
SLIDESHELFD
22in Deep Sliding Server Rack Cabinet Shelf
Packaging Contents
• 1 x 1U Sliding Shelf
• 2 x Front and Rear Mounts
• 2 x Rails
• 1 x Pack of hardware including screws, nuts, and bolts
• 8 x M5 Cage Nuts
• 8 x M5 Screws with washer
System Requirements
• EIA RS-310D compliant 19” rack/cabinet
Tools Required
• Phillips head Screwdriver
• Wrench
Installation
1. Separate the sliding rails into two pieces by fully extending the
rails and lifting/lowering the small lever on the inside of the inner
rail to release the two pieces.
*actual product may vary from photos
2. The piece that contains the lever can be mounted along the sides
of the shelf unit using the provided screws, nuts and washers. The
nut and washer should sit inside the shelf unit with the screws
going in from the outside. The lever on the rail should be towards
the rear of the shelf (without handle).