StarTech.com ARMPIVOT - Manual (Page 10)

Instruction Manual
7
Adjusting Monitor Mount Resistance
WARNING! Forced movement of the Mount Bracket without loosening the screws may
damage the product or the mounted displays.
Always support your display from underneath when making any adjustments to the
LCD Arms or Mount Brackets to avoid damage to the display.
Note: For all adjustments outlined below, turning the screw clockwise will increase the
resistance, while turning the screw counter-clockwise will decrease resistance.
To increase / decrease the tilt resistance, adjust the set screw located on the side of the
Monitor Mount joint, using the M3 Allen Wrench (15).
To increase / decrease swivel resistance, adjust the set screw located on the side of the
Monitor Mount bracket at the Support Post, using the M3 Allen Wrench (15).
Place the wrench in the collar when not in use.