StarTech.com SV831DUSBAU User Manual
Page 11
Instruction Manual
8
Function key
unauthorized access, use Security. Security is
effective for only one device (a computer or a slave).
To lock a device Use the <UP> and <DOWN> arrow
keys to highlight it, then press <F3>. Now, enter up to
4 characters (‘A’~’Z’, ‘0’~’9’, ‘-’) followed by <ENTER> as
new password. A Security enabled device is marked
with a lock (Ï ) following its channel number. To
permanently disable the security function from a
locked device, highlight it, press <F3> then enter
the password.
If you want to access the locked device
temporarily, simply highlight it and press <ENTER>,
the OSD will ask you for the password. After entering
the correct password, you are allowed to use the
device. This device is automatically re-locked once
you switch to another port. During Scan mode, OSD
skips the security-enabled device.
NOTE: If you forget the password, the only way to permanently erase all of the
passwords is to press and hold the 1 and 2 front panel buttons, then hold 7 and 8.
Release 7 and 8, then release 1 and 2.
Function key
screen pops up displaying more functions as
described below. Most of them are marked with a
triangle (
►) indicating there are options to choose
from. Using the <UP> and <DOWN> arrow keys,
select the functions and press <ENTER>. Available
options will be shown in the middle of the screen.
Again, use the <UP> and <DOWN> arrow keys to
view options then press <ENTER> to make your
selection. You can press <ESCAPE> to exit.
Function Key
the computer is a Sun server as shown below. Sun
servers have more keys on the keyboard than a PC.
When a Sun-marked port is selected, the KVM
Switch starts to translate the keys from a PC
keyboard to a Sun keyboard. See the section entitled
Sun Keyboard Mapping for further detail.