StarTech.com SV231DVIUA User Manual
Page 9
Instruction Manual
6
Manual Scan
Allows users to manually switch back and forth between powered-on computers.
Left
To select the previous or the next computer, press
Manual Scan, press any other key.
Scan Time
Four options are available for users to set the Scan Time duration, it Includes 3, 8, 15 and 30
seconds.
Note: Scan Time is set to 3 seconds by default.
To adjust Scan Rate, set the scan time of duration before switching to the next computer:
Left
The KVM Switch generates 1 to 4 beeps indicating a scan time duration for 3, 8, 15 or 30
seconds respectively.
Audio Lock
There are two options for Audio Lock: ON and OFF.
When ON, audio selection follows computer selection. When OFF, audio selection stops
following computer selection. It is useful if you want to listen to a particular computer’s audio
signal while operating other computers.
Left
The KVM switch beeps once or twice corresponding to ON and OFF respectively.
To change which computer port the audio stays on to the currently selected port, press the
following hotkey: