StarTech.com SV231DVIUA - Manual (Page 7)

Instruction Manual 4
4. Repeat for Steps 2 and 3 for each PC port on the KVM switch, or each computer you wish
to use on the KVM.
5. OPTIONAL: Connect any other USB peripherals you wish to share between the connected
computers/devices to the extra USB Hub ports on the Console side.
6. Connect the external power adapter from a wall outlet to the power connector on the
rear panel of the KVM switch. The Power LED should light up solid and/or the LED for the
selected PC port.
7. Power up the first computer/device and wait for it to fully boot and test keyboard/mouse
functionality.
8. Once operation has been successfully confirmed, switch to the next port and power up
that computer/device and confirm.
Driver Installation
No driver installation is required for the KVM switch, as the keyboard and mouse uses native USB
keyboard/mouse drivers that are already installed on all operating systems that fully support
USB.