StarTech.com SV231DPDDUA User Manual
Page 10
Instruction Manual
7
Audio Lock
There are two options for Audio Lock: ON and OFF. When ON, audio selection follows
computer selection. When OFF, audio selection stops following computer selection. It
is useful if you want to listen to a particular computer’s audio signal while operating
other computers.
Left
The KVM switch beeps once or twice corresponding to ON and OFF respectively.
To change which computer port the audio stays on to the currently selected port, press
the following hotkey:
USB-Port Rule
There are two settings for USB-Port Rule: ON or OFF.
When set to ‘ON’, the USB Hub ports follows computer selection.
When set to ‘OFF’, the USB Hub ports stays on the currently selected PC port.
Pressing the hotkey below to turn ON/OFF the USB-Port Rule on both USB Hub ports:
Left
To change the PC port that the USB hub stays on to the currently selected PC port,
press the following hotkey:
Left
NOTE: Please make sure that installation of the USB device has been accomplished
before switching to the next computer.