StarTech.com SV831DVIU - Manual (Page 10)

Instruction Manual
7
Manual Scan
Enables you to manually switch back and forth between the powered computers:
Left , left , F2
Press the arrow key to select the previous computer and the arrow key
to select the next computer. Press any other key to abort Manual Scan mode.
Scan Time
To adjust Scan Time, which sets the duration before switching to the next computer in
Auto Scan:
Left , Left , F3
The switch will beep one to four times indicating the scan interval of 3, 8, 15 and 30
seconds respectively.
Set Maximum Video Resolution
By default the KVM switch is set to output an EDID signal with a maximum video
resolution of 1024 x 768 to the host computer systems. To be able to set a higher video
resolution on the host computer systems, use the following command with the 4 digit
code for the maximum video resolution you wish to set.
NOTE: Do not use the numeric keypad for entering the 4-Digit Code. Only use the
number keys along the top row of the keyboard.
Left , Left , V, 4 digit code
4-Digit Code Resolution 4-Digit Code Resolution
1007 1024 x 768 1609 1600 x 900
1208 1280 x 800 1612 1600 x 1200
1210 1280 x 1024 1610 1680 x 1050
1307 1360 x 768 1910 1920 x 1080
1409 1440 x 900 1912 1920 x 1200
1410 1440 x 1050
NOTE: You may need to reboot the host computer(s) for the new settings to take affect.
If not done automatically by the host computer’s operating system, you may then
need to manually adjust the display settings to the new maximum resolution.