StarTech.com VS410HDMIE - Manual (Page 5)

Instruction Manual
2
Operating Controls and Functions
Front Panel
1. Remote control sensor
2. Input select/Indicators: Press the “INPUT” button repeatedly to switch
to your desired input source and the LED will illuminate to indicate
which input source is selected.
3. Signal Enhancement/Indicator: Press the “Signal Enhance” button
to turn on this feature to improve signal quality after long distance
transmission. Press again to turn off. The LED will illuminate when the
signal is enhanced
4. POWER Switch/Indicator: When the power supply is connected to the
system, the system will automatically to turn on and the power LED will
illuminate. Press the “POWER” button to turn on/off the system
Rear Panel
1. HDMI output: Connect the HDMI out of the unit to the HDMI input of
your display using an HDMI cable
2. HDMI Inputs: Connect each of the input ports to the HDMI or DVI
output of your source equipment such as DVD player or set-top-box
3. Power: Plug the 5V DC power supply into this unit and connect the
adapter to an A/C wall outlet.
1 2 3 4
1 2 3