Set the auto scan time interval – StarTech.com VS420RDVIA User Manual

Page 12

Text mode
Original mode

Instruction Manual

Set the Auto Scan Time Interval

Step 1

Press 3 and 4 at the same time.

Step 2

All four LEDs should be blinking. Press one to set the auto scan time interval.

• 1 represents 8 seconds
• 2 represents 15 seconds
• 3 represents 30 seconds
• 4 represents 45 seconds

Reset the Unit to its Default Settings

1. Power off the Video Matrix Switch.
2. Press and hold Option.
3. Power on the Video Matrix Switch.
4. Press 1 to reset everything back to the default settings.