StarTech.com ST121MOUNT - Manual

Instruction Manual
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Manual Revision: 06/22/2011
For the most up-to-date information, please visit: www.startech.com
Packaging Contents
• 2 x Mounting Brackets
System Requirements
• ST121R or the receiver/remote unit included with
ST121UTP and ST122UTPA
ST121MOUNT
Mounting Bracket for ST121 Series VGA Video Extenders
*actual product may vary from photos
Installation
Wall/Surface Mounting
1. Along either side of the ST121 series receiver units are 2
screws. Remove them.
2. Place the slotted side of one of the brackets against the
side of the STS121 series receiver units, so the screw
holes are visible through the slots.
3. Using the screws that were previously removed, secure
the bracket against the receiver unit.
4. Repeat steps 2 and 3 for the opposite side of the
receiver unit.
5. Mount the completed receiver unit to a flat, stable
surface and attach using the appropriate hardware
(screws, bolts, etc.) (not included) for the surface type.